Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method          下载免费PDF全文

Samila Bandara  Alessio Ferrari  Lyesse Laloui 《国际地质力学数值与分析法杂志》2016,40(9):1358-1380

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Stress‐dependent hardening and failure surfaces of dry sand     

W. Ehlers  O. Avci 《国际地质力学数值与分析法杂志》2013,37(8):787-809

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach     

Tony Khalil  Nadia Saiyouri  Bogdan Muresan  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2013,37(5):491-502

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

王588块泥浆污染深穿透酸液研究与评价     

胡增国 《海洋地质译丛》2010,(2):58-62,71

王588块钻井泥浆污染主要是固相入侵和滤液与地层水的不配伍性。通过实验,优选出了具有高效深穿透能力以及固相溶解量大的表面活性剂DS-101酸液复配体系。实验表明,该体系耐温性强,对油泥具有极强的分散和溶解作用,对泥浆污染有明显的解堵效果,岩心渗透率恢复率可达127%。  相似文献   

改性粉煤灰性质及其封堵油层大孔道效果     

刘义刚 《海洋地质译丛》2010,(3):47-52

粉煤灰是燃煤火力发电厂的废弃物,由大小不等、结构疏松的非晶质玻璃相球形颗粒组成,其主要化学成分是铝硅酸盐,具有来源广和成本低等特点。在水热条件下,Holler和Wirsching首先利用粉煤灰与碱（NaOH或KOH）作用合成了沸石。针对油田封堵油层孔隙即改善注水井吸水效果的实际需求,在总结和吸取粉煤灰和沸石颗粒封堵油层孔隙矿场施工成功经验和不足基础上,探索了水热条件下粉煤灰部分转化为沸石的配方组成和工艺条件,研究了改性粉煤灰组成和外观结构特征,评价了改性粉煤灰的封堵效果,分析了改性粉煤灰封堵作用机理。研究结果对改善油层孔隙封堵效果、提高油田注水效率具有重要应用价值。  相似文献   

An enhanced constitutive model for crushable granular materials     

Ali Daouadji  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2010,34(6):555-580

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Determination of the constriction size distribution of granular filters by filtration tests     

J. Sjah  E. Vincens 《国际地质力学数值与分析法杂志》2013,37(10):1231-1246

This paper presents the calibration of an experiment based on filtration tests, able to provide the cumulative constriction size distribution of granular materials. Here, simulations of these tests are performed using a discrete element method. Filters of same density but different thicknesses are created with a poly‐sized spherical material. Lateral periodic boundaries for the samples are used, and their size is calibrated so that a representative elementary volume is obtained. Fine particles are released on the created samples, and the particle size distribution of the collected material that successfully crossed the filters is computed. These particle size distributions are related to the underlying cumulative constriction size distribution (CSD) of the granular material involved in the samples. The CSD is derived using a probabilistic approach for the path length of individual particles through a granular material. We settle all the requisites related to the technique and to the fine particles that are released to allow reaching a correct CSD for the filter. The reference CSD used for the calibration of the experiment is obtained after a radical partition of the void space into Delaunay tetrahedra and a geometrical characterisation of constrictions on each tetrahedron face. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Using archaeological data and sediment parameters to review the formation of the Gravettian layers at Krems-Wachtberg     

Marc Händel  Roswitha Thomas  Tobias Sprafke  Philipp Schulte  Michael Brandl  Ulrich Simon  Thomas Einwögerer 《第四纪科学杂志》2021,36(8):1397-1413

  相似文献   

廉州湾南部海域泥沙来源及运移趋势分析     

谷东起  吴桑云 《海洋科学进展》2001,19(1):25-31

重矿物组合、含量变化和特征矿物的分布及变化规律是沿海泥沙来源和运移趋势判断的重要手段之一。通过对廉州湾南部海域海底表层沉积物的重矿物分析 ,发现该区重矿物分布以北海地角为界 ,其百分含量和特征矿物南北有别 ,可能分别代表不同的物质来源区。其中廉州湾北部南流江流域来沙是该区主要物源 ,运移趋势为自 NE向 SW;地角西南岸段、岭南侧海岸侵蚀及银滩来沙也为该区提供了部分物源 ,运移趋势为绕过冠头岭沿海岸向 N方向运移。由于缺乏北海陆域陆相地层重矿物含量等相关资料 ,暂未做物质来源区的具体判断  相似文献   

藻类功能食品的物质基础与研究开发现状   总被引：3，自引：0，他引：3  

周德庆  管华诗 《中国海洋大学学报(自然科学版)》1995,(Z1)

对藻类功能食品的研究和开发现状作综述报道。涉及的主要内容有：作为功能食品物质基础的食物纤维、ＰＵＦＡ、维生素、矿物质和微量元素、氨基酸以及其它有生理活性的物质。  相似文献